How Long Is a Roll of Carpet? Widths and Lengths Explained
Carpet is sold by the roll width, not by a fixed length. The roll is a long tube 3.66 m or 4 m wide, and the fitter cuts the length needed. That single fact drives seams, waste and cost.
Standard roll widths
| Width | Common name | Used for |
|---|---|---|
| 3.66 m | 12 ft roll | UK and Europe standard |
| 4.0 m | 13 ft 1 in | Wide rooms, fewer seams |
| 2.0 m | 6 ft 7 in | Stairs, small rooms, runners |
| 1.83 m | 6 ft | US narrow roll |
Length
A roll is typically 25–40 m long from the mill, but retailers cut whatever length you order. There is no “standard length” to plan around — you order linear metres at the roll width.
Why width matters more than length
Carpet has a pile direction. Every join must run the same way or the seam shows as a colour change. The roll width decides where seams fall:
- Room under 3.66 m wide: one length, no seam across the width.
- Room 4–6 m wide: two lengths, one seam along the length.
- L-shaped room: plan the seam at the internal corner.
Calculating what you need
- Measure the room in both directions.
- Divide the width by the roll width to get the number of drops.
- Multiply drops by the room length, then add 10% for trimming and pattern matching.
- If the carpet has a pattern repeat, add one full repeat per drop.
Waste
Waste of 10–15% is normal. A room 3.8 m wide needs a 3.66 m roll plus a 0.3 m strip — which is almost all waste unless the strip can be used in a wardrobe or landing.
Stairs
Stairs are usually done from a 4 m roll or a runner of 0.7–0.9 m width. A full-width stair carpet needs the same pile direction as the landing, so plan the join at the top nosing.
Buying tips
- Order all rooms from the same batch — dye lots vary.
- Keep 1 m spare for a future repair.
- Check the pile direction arrow before cutting.
Quick answers
How long is a standard carpet roll? There is no standard length — rolls are cut to order at a fixed width, usually 3.66 or 4 m.
Can I join two rolls? Yes, but the pile must run the same way and the join should sit away from a doorway.